The headlight is an NOS unit from an unknown bike that is missing the indicator lights and a switch on the side. I have the key switch for it and the mounting hardware. But, not knowing what bike it's from, I have no idea where to get lights and a switch to fill the other holes, or more importantly, how the heck to assemble the key switch? I understand the basic configuration, but it doesn't seem like the parts fit together like they should. I also have NO clue how to wire the thing! (I have a separate page to deal with my headlight issues.)

I've begun painting the silver parts. Top right photo is the current state of the formerly red headlight shell - before being polished.

I stole the license plate holder off my 250 to use on this bike because I prefered the rounded shape over the more rectangular part the 160 had. Part of the Sebring tank trade was a round tail light that will work great with this mount. The mount itself was bent and broken so it needed some work. First I had to reshape the lower portion that mounts on the fender, it was set up for a flatter fender but a few minutes with a hammer and dolly took care of that. One spot weld was broken and there was some rust between the pieces so I broke the remaining spot welds, cleaned everything up, brazed the tail back together, and rewelded the two pieces so it should be ready to go after it's been painted.